Micro electro-discharge machining micro-EDM is a machining process capable of removing material in sub-grain size range and machining a range of materials irrespective of their hardness. Due to the unique capabilities offered by micro-EDM process in manufacturing high accuracy micro-scale parts with complex geometries, it has potential to meet wide spectrum of current and future needs in the electronics, automotive, optics and bio-medical industries.
Academic Qualifications Qualifications Details: Experience 31 years Experience Description: At present serving as HOD for the second term from Numerical methods, Gas dynamics, Non-conventional energy power generation, Experimental techniques, Education technology and Environmental Micro edm modeling thesis, Computational fluid dynamics using Fluent software.
Served as Dean Faculty Welfare and Dean Research in the yeareach for a period of approximately 3 months. Pandey obtained his B. Pandey also did M. Tech in Heat Power from the same Institute in Currently he is working as Professor of the Mechanical.
He also served the department in the capacity of head from July 07 to 13 July He has also worked as faculty consultant in Colombo Plan Staff College, Manila, Philippines as seconded faculty from Government of India in the year Pnadey has got 36 SCI indexed journal papers and in total 80 research articles are indexed in Scopus.
Ravi Ranjan Kumar and Prof. Proceedings 5 — Volumepp, Pandey, Experimental and numerical analysis of forced convection heat transfer in turbulent flow, Procedia Engineering —Elsevier Publications, doi: Deepak Sharma and K. Abhijit Dey and K. A comparative analysis of heat transfer in extended surfaces with and without holes, Lecture Notes in Mechanical Engineering Volume Part F8,Pages Pandey, Size control synthesis and characterization of ZnO nanoparticles and its application as ZnO-water based nanofluid in heat transfer enhancement in light water nuclear reactor, Kerntechniq, 82 1; page 1—13, DOI Pandey, Facile synthesis of TiO2 nanoparticle and numerical investigation of nanofluids heat transfer characteristics for application in nuclear reactor using CFD Code has been published in Nanoscience and Nanotechnology Letters, Vol.
Experimental studies on hydrodynamics of re-circulating fluidized beds, International journal of Turbo and Jet Engines, Volume 24 2pp. M, Numerical analysis of scramjet combustor with innovative strut and fuel injection techniques, International Journal of Hydrogen Energy, Vol.
Pandey, Numerical analysis on the effect of flow rates and jet diameters in rewetting vertical nuclear fuel bundles with jet impingements, Annals of Nuclear Energy, Volume 94, AugustPP. Effect of variation of length-to-depth ratio and Mach number on the performance of a typical double cavity scramjet combustor, Acta AstronauticaPP.
Pinku Debnath and K. Pandey, Investigation on the effects of operating variables on the performance of two-strut scramjet combustor, International Journal of Hydrogen EnergyVolume 41, Issue 45, 7 Decemberpageshttp: Pandey, Effect of parametric variation of strut layout and position on the performance of two-strut scramjet combustor, International Journal of Hydrogen Energy, Volume 42, Issue 15, 13 April http: Pandey, Gautam Choubey, Fayez Ahmed, Dilbahar Hussain Laskar, Pushpdeep Ramnani, Effect of variation of hydrogen injection pressure and inlet air temperature on the flow-field of a typical double cavity scramjet combustor,International Journal of Hydrogen Energy, volume 42pp XLIV 1pp.
SinghOveepsa Chakraborty and K. Pandey and Surya Kumar,: Pandey, Comparative study of co2 capture and storage technology: Pandey, D,H,Das and T. CFD Analysis for pressure and temperature for a rocket nozzle with two inlets at mach 2.
Pandey, CFD analysis of combustion phenomena at high speed fuel inlet of Mach 0.
Sangeeta Pathak and K. Pandey, Experimental studies on genotoxic effects of pesticides on M1 generation of peas, 3rd International Congress of Environmental Research, September,University of Mauritius, Reduit, Mauritius.
Pandey and Videsh Roy, Intake valve design for high level swirl induction in carbureted park ignition engine, 3rd International Congress of Environmental Research, September,University of Mauritius, Reduit, Mauritius.
Pandey Prateek Srivastava, K. Singh, Study on supersonic flows in the De Laval nozzle at Mach number 1.MODELLING OF MICRO ELECTRO DISCHARGE MACHINING IN AEROSPACE MATERIAL A Thesis Submitted to National Institute of .
This thesis is focused on the modeling and simulation of the single discharge micro-EDM. Firstly, a method based on analytical solution of the heat transfer equation to determine the energy distribution ratio is presented.
A STUDY ON THE MICRO ELECTRO-DISCHARGE MACHINING OF AEROSPACE MATERIALS. A Thesis. Presented to. The Faculty of the Department of Architectural and Manufacturing Sciences. 80 ashio-midori.comAL.
ZahiruddinandKunieda,)reliedonthemeltingisothermaltodeterminethe shapeofcraters. As a result, these models all feature a bowl-shaped crater.
Gmail is email that's intuitive, efficient, and useful. 15 GB of storage, less spam, and mobile access. The availability of theoretical and empirical models to predict the machining performance measures of the micro-electrical discharge machining (micro-EDM) process helps in process optimization.